HongKong Baisite Bearing Co., Ltd
  • AddressKunshan Development Zone,Tsimshatsui Kowloon Hongkong
  • Factory AddressKunshan Development Zone,Tsimshatsui Kowloon Hongkong
  • Worktime9:00-18:00
  • Phone(Working Time)00852- 68532236
  • Phone(Nonworking Time)00852- 68532236
  • Fax00852- 68532237
Company News
New rolling joint bearings and bearing selection 2018-11-07 18:25:04
The joint bearing is a plain bearing and is mainly composed of an outer spherical inner ring and an inner spherical outer ring. Generally used for lower speed swinging motion, tilting motion and rotary motion. Compared with rolling bearings, it is simple...
Solution for excessive bearing temperature during motor operation 2018-10-31 17:16:05
First, the concept of bearing overheating In general, bearing overheating means that the rolling temperature rise exceeds 55 ° C and the sliding bearing temperature rise exceeds 40 ° C. Second, the cause of motor bearing overheating and...
Installation and maintenance of oil pump sliding bearings 2018-10-23 18:01:12
First, the installation of sliding bearings Sliding bearings are generally used under conditions of low speed and heavy load. The following are the following elements for sliding bearing installation: 1. The sliding bearing is installed...
Discussion on bearing selection 2018-09-28 17:54:00
1 Introduction With the progress and development of society, mechanization has been widely used in production and life. As an indispensable part of the machine, the range of use of the bearing will become wider and wider, as the bearing is used...
How to choose INA rolling bearing configuration 2018-09-11 17:55:39
Analysis of the selection method of INA rolling bearing configuration. Usually, the shaft is supported radially and axially by two INA bearings, and the rolling bearing on one side is called a fixed end bearing, which bears both radial and axial loads,...
Thrust bearing support 2018-09-03 16:44:01
Thrust bearings are mainly divided into three types: rigid strut type, hydraulic strut type and balance block strut type according to the type of strut. In addition, there are elastic pads, springs, pistons, elastic disc posts and the like. details as...
Fault diagnosis of mud pump bearings 2018-08-28 17:28:49
The mud pump is an important equipment in the drilling engineering. Its function is to input the high pressure mud used to carry the cuttings during drilling. During the drilling process, it is necessary to ensure that the high-pressure mud is pumped...
Introduction to the basic elements of purchasing INA rolling bearings 2018-08-20 17:57:16
When designing a new spindle, before selecting an INA bearing, consider the spindle performance parameters to roughly determine the most critical performance and then proceed to further exploration. (Includes: spindle speed, spindle accuracy, spindle...
Rolling bearing assembly method 2018-08-08 17:14:41
When assembling the bearing, the most basic requirement is to make the applied axial force directly on the end face of the ferrule of the mounted bearing (when mounted on the shaft, the applied axial force should directly act on the inner ring, When the...
MRJ 5 E , RHP/NSK – 2 – CYLINDRICAL ROLLER BEARING , INNER ASSEMBLY OUTER CUP –DIMENSIONS, INCH SIZE ID 5 INC X 10 INCH 2018-07-20 15:41:44
MRJ 5 E , RHP/NSK – 2 – CYLINDRICAL ROLLER BEARING , INNER ASSEMBLY OUTER CUP –DIMENSIONS, INCH SIZE ID 5 INC X 10 INCH NJ 2315 C3 – 2 31305 TIM – 10 Cylindrical rollers and raceways are line contact bearings. Load capacity, mainly bear radial load....
  • Page1of2
  • 1
  • 2